2023 Publications Utilizing the AIF

Acknowledgement Statement for User Publications

Publications that include results obtained at AIF should acknowledge the Facility with this statement:

This work was performed in part at the Analytical Instrumentation Facility (AIF) at North Carolina State University, which is supported by the State of North Carolina and the National Science Foundation (award number ECCS-2025064). The AIF is a member of the North Carolina Research Triangle Nanotechnology Network (RTNN), a site in the National Nanotechnology Coordinated Infrastructure (NNCI).

After your results have been published, please submit bibliographic information to aif-contact@ncsu.edu.

96. Myers Harbinson, Michael Pudlo, Sipan Liu, Taimur Chaudhry, Yuxuan Liu, Chenxi Sui, Yong Zhu, Po-Chun Hsu, Jong E. Ryu, “Template-free scalable roll-to-roll fabrication of textured transparent film for passive radiation cooling of photovoltaics.” Manufacturing Letters, 35:166-173 (2023).
95. Ni Yang, Chengying Xu, “An ultrathin polymer-derived UHTCs coating on CFRP substrate: Effective electromagnetic wave absorber.” Composites Communications, 43:101713 (2023).
94. Shaun O’Donnell, Eric Gabilondo, Subhendu Jana, Aylin Koldemir, Theresa Block, Myung-Hwan Whangbo, Reinhard Kremer, Rainer Pöttgen, Paul A. Maggard, “Cation exchange route to a Eu(II)-containing tantalum oxide.” Journal of Solid State Chemistry, 328 (124338) (2023).
93. Nathan T. Hames, Drew Balsbough, Jiaqi Yan, Siyu Wu, Xiaobing Zuo and Richard J. Spontak, “Tunable thermoplastic elastomer gels derived from controlled-distribution triblock copolymers with crystallizable endblocks.” Materials Horizons, 10 (11):4968-4975 (2023).
92. Siyan Wang, Jeannie Egan & Sonja Salmon, “Preparation and characterization of cotton fiber fragments from model textile waste via mechanical milling and enzyme degradation.” Cellulose (2023).
91. Alena N. Joignant, Kevan T. Knizner, Ying Xi, David C. Muddiman, “Evaluating the optimal tissue thickness for mass spectrometry imaging using infrared matrix-assisted laser desorption electrospray ionization.” Rapid Communications In Mass Spectrometry, 37 (22):e9638 (2023).
90. Eunice Chee, Emily Mihalko, Kimberly Nellenbach, Jennifer Sollinger, Ke Huang, Mason Hon, Sanika Pandit, Ke Cheng, Ashley Brown, “Wound-triggered shape change microgels for the development of enhanced biomimetic function platelet-like particles.” Journal of Biomedical Materials Research Part A, (2023).
89. Matheus B. Soares, Owen W. Duckworth, Luís R.F. Alleoni, “The role of dissolved pyrogenic carbon from biochar in the sorption of As(V) in biogenic iron (oxyhydr)oxides.” Science of The Total Environment, 865:161286 (2023).
88. Venkata Bhuvaneswari Vukkum, Jijo Christudasjustus, Troy Y. Ansell, Andy Nieto, Rajeev Kumar Gupta, “Influence of carbon nanotubes on microstructure and corrosion performance of additively manufactured 316L stainless steel.” Corrosion Science, 224:111494 (2023).
87. Danielle M. Nalband, Prottasha Sarker, Saad A. Khan, Donald O. Freytes, “Characterization and biological evaluation of a novel flavonoid-collagen antioxidant hydrogel with cytoprotective properties.” Journal of Biomedical Materials Research Part B Applied Biomaterials, (2023).
86. Haozhi Zhang, Paul R. Carriere, Emmanuel D. Amoako, Chris D. Rock, Seiji U. Thielk, Colin G. Fletcher & Timothy J. Horn, “Microstructure and Elevated Temperature Flexure Testing of Tungsten Produced by Electron Beam Additive Manufacturing.” JOM, 75:4094–4107 (2023).
85. Venkata Bhuvaneswari Vukkum, Troy Y. Ansell, Andy Nieto & Rajeev Kumar Gupta, “Intergranular Corrosion of CNT-Reinforced and Laser Powder Bed Fusion-Printed 316L Stainless Steel.” JOM, 60 (2023).
84. Eric A. Gabilondo, Ryan J. Newell, Rachel Broughton, Aylin Koldemir, Rainer Pöttgen, Jacob L. Jones, Paul A. Maggard, “Switching Lead for Tin in PbHfO3: Noncubic Structure of SnHfO3.” Angewandte Chemie-international Edition, e202312130 (2023).
83. C. S. Witharamage, A. A. Darwish, J. Christudasjustus, J. Soltis, and R. K. Gupta, “Time-Dependent Corrosion Behavior of Aluminum Using Advanced Electrochemical and Characterization Techniques.” Journal of The Electrochemical Society, 170 (9):091505 (2023).
82. Ethan J. Frey, Sooik Im, Adam L. Bachmann, Jan Genzer, Michael D. Dickey, “Patterning of a High Surface Area Liquid Metal-Carbon Composite Film Using Laser Processing.” Advanced Functional Materials, 2308574 (2023).
81. Matheus B. Soares, Owen W. Duckworth, Miroslav Stýblo, Peter H. Cable, Luís R.F. Alleoni, “Pyrolysis temperature and biochar redox activity on arsenic availability and speciation in a sediment.” Journal of Hazardous Materials, 460:132308 (2023).
80. Amit Mishra, Ryan Dudek, Anne Gaffney, Dong Ding, Fanxing Li, “Spinel oxides as coke-resistant supports for NiO-based oxygen carriers in chemical looping combustion of methane.” Catalysis Today, 424:112462 (2023).
79. Jennelle Fortunato, Benjamin Z. Zydlewski, Ming Lei, Noah P. Holzapfel, Matthew Chagnot, James B. Mitchell, Hsin-Che Lu, De-en Jiang, Delia J. Milliron, and Veronica Augustyn, “Dual-Band Electrochromism in Hydrous Tungsten Oxide.” ACS Photonics, 10 (9):3409-3418 (2023).
78. Kacie M. Wells, Yusuf Ciftci, Bharadwaja S.T. Peddinti, Reza A. Ghiladi, Govindsamy Vediyappan, Richard J. Spontak, Revathi Govind, “Preventing the spread of life-threatening gastrointestinal microbes on the surface of a continuously self-disinfecting block polymer.” Journal of Colloid and Interface Science, 652 (Part A):718-726 (2023).
77. Kaiying Chen, Jean Marcel Deguenon, Roger D. Lawrie, and R. Michael Roe, “Biomolecular Minerals and Volcanic Glass Bio-Mimics to Control Adult Sand Flies, the Vector of Human Leishmania Protozoan Parasites.” Biomolecules, 13 (8):1235 (2023).
76. Cathay Chai Au-Yeung, Ming-Yi Leung, Shiu-Lun Lai, Shun-Cheung Cheng, Lok-Kwan Li, Man-Chung Tang, Wing-Kei Kwok, Chi-Chiu Ko, Mei-Yee Chan, and Vivian Wing-Wah Yam, “Thermally activated delayed fluorescence tetradentate ligand-containing gold(iii) complexes with preferential molecular orientation and their application in organic light-emitting devices.” Material Horizons (2023).
75. Grayson L. Cave, Elise A. Richardson, Kaiying Chen, David W. Watson and, R. Michael Roe, “Acaricidal Biominerals and Mode-of-Action Studies against Adult Blacklegged Ticks, Ixodes scapularis.” Microorganisms, 11 (8):1906 (2023).
74. Yuan Tian, Zoe Benedict, Fanxing Li, Yingchao Yang, Debtanu Maiti, Yixiao Wang, Rebecca Fushimi, “Carbon-Assisted, Continuous Syngas Production in a Chemical Looping Scheme.” Topics in Catalysis (2023).
73. N. Sheoran, B. Boland, S. Thornton, J. R. Bochinski, L. I. Clarke, “Enhancing ionic conductivity in polymer melts results in smaller diameter electrospun fibers.” Applied Physics Letters, 123 (7):074103 (2023).
72. Runxia Cai, Leo Brody, Yuan Tian, Luke Neal, Arnab Bose, Fanxing Li, “Numerical modeling of chemical looping oxidative dehydrogenation of ethane in parallel packed beds.” Chemical Engineering Journal, 469:143930 (2023).
71. Stacy Schkoda, Brian Horman, Shannah K. Witchey, Anton Jansson, Soraia Macari, Heather B. Patisaul, “Skeletal effects following developmental flame-retardant exposure are specific to sex and chemical class in the adult Wistar rat.” Frontiers in Toxicology, 5 (1216388) (2023).
70. Chuanshen Du, Paul Gregory, Dhanush U. Jamadgni, Alana M. Pauls, Julia J. Chang, Rick W. Dorn, Andrew Martin, E. Johan Foster, Aaron J. Rossini, Martin Thuo, “Spatially Directed Pyrolysis via Thermally Morphing Surface Adducts.” Angewandte Chemie – International Edition, e202308822 (2023).
69. Akash Singh, Yongshin Kim, Reece Henry, Harald Ade, and David B. Mitzi, “Study of Glass Formation and Crystallization Kinetics in a 2D Metal Halide Perovskite Using Ultrafast Calorimetry.” Journal of The American Chemical Society, 145 (33):18623–18633 (2023).
68. S.P. O’Brien, J. Christudasjustus, E. Delvecchio, N. Birbilis, R.K. Gupta, “Microstructure and corrosion of CrFeMnV multi-principal element alloy.” Corrosion Science, 222:111403 (2023).
67. Sarah E. Morgan, Carwynn D. Rivera, Morgan L. Willis, Gregory W. Peterson, John J. Mahle, Laura Mundy, and Gregory N. Parsons, “Factors and Limitations of Green, Rapid Metal–Organic Framework-Fabric Synthesis and Effects on Dual Chemical Warfare Agent Protection.”
Industrial & Engineering Chemistry Research, 62 (31)12199–12208 (2023).
66. Zvikomborero Machikiti, Behnam Pourdeyhimi, Jan Genzer, and Kirill Efimenko, “Tuning Interfacial Adhesion in Polyester/Polyamide Systems.” Industrial & Engineering Chemistry Research, 62 (31):12209–12219 (2023).
65. H. Alex Hsain, Younghwan Lee, Patrick D. Lomenzo, Ruben Alcala, Bohan Xu, Thomas Mikolajick, Uwe Schroeder, Gregory N. Parsons, Jacob L. Jones, “Wake-up free ferroelectric hafnia-zirconia capacitors fabricated via vacuum-maintaining atomic layer deposition. Journal of Applied Physics; 133 (22): 225304 (2023).
64. Sipan Liu, Chenxi Sui, Myers Harbinson, Michael Pudlo, Himendra Perera, Zhenzhen Zhang, Ruguan Liu, Zahyun Ku, Md Didarul Islam, Yuxuan Liu, Ronghui Wu, Yong Zhu, Jan Genzer, Saad A. Khan, Po-Chun Hsu, and Jong Eun Ryu, “A Scalable Microstructure Photonic Coating Fabricated by Roll-to-Roll “Defects” for Daytime Subambient Passive Radiative Cooling.” Nano Letters (2023).
63. Holger Saare, Wenyi Xie, and Gregory N. Parsons, “Comparison of BCl3, TiCl4, and SOCl2 chlorinating agents for atomic layer etching of TiO2 and ZrO2 using tungsten hexafluoride.” Journal of Vacuum Science & Technology A 41 (042602) (2023).
62. Bradley A. Davis, Jan Genzer, Kirill Efimenko, and Milad Abolhasani, “Continuous Ligand-Free Catalysis Using a Hybrid Polymer Network Support.” JACS Au (2023). 
61. Venkata Bhuvaneswari Vukkum; Evan Delvecchio; Jijo Christudasjustus; Steven Storck; Rajeev Kumar Gupta, “Intergranular Corrosion of Feedstock Modified—Additively Manufactured Stainless Steel After Sensitization.” CORROSION, 79 (6):624-636 (2023).
60. Yaewon Park, Debjyoti Banerjee, Soo Ah Jin, Shanshan Li, Susan Beck, Lauren Purser, and Ericka Ford, “Organophosphate-Cyclodextrin Inclusion Complex for Flame Retardancy in Doped Cellulose Acetate Butyrate Melt-Spun Fibers.” Industrial & Engineering Chemistry Research, 62 (29):11595-11605 (2023).
59. Sina Azizi Machekposhti, Sachin Kadian, Lyndsi Vanderwal, Shane Stafslien, Roger J. Narayan, “Novel hollow biodegradable microneedle for amphotericin B delivery.” MedComm, 4 (4):e321 (2023).
58. Hang Chi, Yunbo Ou, Tim B. Eldred, Wenpei Gao, Sohee Kwon, Joseph Murray, Michael Dreyer, Robert E. Butera, Alexandre C. Foucher, Haile Ambaye, Jong Keum, Alice T. Greenberg, Yuhang Liu, Mahesh R. Neupane, George J. de Coster, Owen A. Vail, Patrick J. Taylor, Patrick A. Folkes, Charles Rong, Gen Yin, Roger K. Lake, Frances M. Ross, Valeria Lauter, Don Heiman & Jagadeesh S. Moodera, “Strain-tunable Berry curvature in quasi-two-dimensional chromium telluride.” Nature Communications, 14 (1):3222 (2023).
57. Xiangru Wei, Grayson Johnson, Yifan Ye, Meiyang Cui, Shen-Wei Yu, Yihua Ran, Jun Cai, Zhi Liu, Xi Chen, Wenpei Gao, Paul J. L. Bean, Weijie Zhang, Tommy Yunpu Zhao, Frédéric A. Perras, Ethan J. Crumlin, Xu Zhang, Robert J. Davis, Zhangxiong Wu, and Sen Zhang, “Surfactants Used in Colloidal Synthesis Modulate Ni Nanoparticle Surface Evolution for Selective CO2 Hydrogenation.” Journal of the American Chemical Society, 145 (26):14298-14306 (2023).
56. Liwen Zhang, Małgorzata Kowalik, Qian Mao, Behzad Damirchi, Yongyi Zhang, Philip D. Bradford, Qingwen Li, Adri C. T. van Duin, and Yuntian T. Zhu, “Joint Theoretical and Experimental Study of Stress Graphitization in Aligned Carbon Nanotube/Carbon Matrix Composites.” ACS Applied Material Interfaces, 15 (27):32656-32666 (2023).
55. Siyuan Zhu, Yufeng Chen, Vasishta Somayaji, Peter Novello, Dennis Chacko, Fanxing Li, and Jie Liu, “One-Step Synthesis of a High Entropy Oxide-Supported Rhodium Catalyst for Highly Selective CO Production in CO2 Hydrogenation.” ACS Applied Material Interfaces, 15 (26):31384-31392 (2023).
54. Jack S. Turicek, Alexander D. Snyder, Kalyana B. Nakshatrala, Jason F. Patrick, “Topological effects of 3D-printed copolymer interlayers on toughening and in situ self-healing in laminated fiber-composites.” Composites Science and Technology, 240 (110073) (2023).
53. Wan-Yu Tsai, Shelby B. Pillai, Karthik Ganeshan, Saeed Saeed, Yawei Gao, Adri C. T. van Duin, Veronica Augustyn, and Nina Balke, “Effect of Electrode/Electrolyte Coupling on Birnessite (δ-MnO2) Mechanical Response and Degradation.” ACS Applied Materials & Interfaces, 15 (21):26120–26127 (2023).
52. Yuan Tian, Phillip R. Westmoreland, Fanxing Li, “CaMn0.9Ti0.1O3 based redox catalysts for chemical looping – Oxidative dehydrogenation of ethane: Effects of Na2MoO4 promoter and degree of reduction on the reaction kinetics.” Catalysis Today, 417 (113725) (2023).
51. Ming Liu, Hai Pan, Parminder Kaur, Lucia J. Wang, Miao Jin, Ariana C. Detwiler, Patricia L. Opresko, Yizhi Jane Tao, Hong Wang, Robert Riehn, “Assembly path dependence of telomeric DNA compaction by TRF1, TIN2, and SA1.” Biophysical Journal, 122, (10):1822-1832 (2023).
50. Akhlak U. Mahmood, Mehedi H. Rizvi, Joseph B. Tracy, and Yaroslava G. Yingling, “Solvent Effects in Ligand Stripping Behavior of Colloidal Nanoparticles.” ACS Nano (2023).
49. Ruihao Yuan, Abinash Kumar, Shihao Zhuang, Nicholas Cucciniello, Teng Lu, Deqing Xue, Aubrey Penn, Alessandro R. Mazza, Quanxi Jia, Yun Liu, Dezhen Xue, Jinshan Li, Jia-Mian Hu, James M. LeBeau, and Aiping Chen, “Machine Learning-Enabled Superior Energy Storage in Ferroelectric Films with a Slush-Like Polar State.” Nano Letters, 23 (11):4807-4814 (2023).
48. Jenelle Fortunato, Yun Kyung Shin, Michael A. Spencer, Adri C. T. van Duin, and Veronica Augustyn, “Choice of Electrolyte Impacts the Selectivity of Proton-Coupled Electrochemical Reactions on Hydrogen Titanate.” Journal of Physical Chemistry C, 127 (25):11810–11821 (2023).
47. Masoome Haghani, Jacob C. Jonsson, Mohammad Salamati, Wayne Place, “Comparative assessment of optical characterization of prismatic materials (PMs), using genBSDF tool for virtual simulations and a goniophotometer for physical measurements.” Building and Environment, 238:110323 (2023).
46. Leo Brody, Mahe Rukh, Runxia Cai, Azin Saberi Bosari, Reinhard Schomäcker, Fanxing Li, “Sorption-enhanced steam reforming of toluene using multifunctional perovskite phase transition sorbents in a chemical looping scheme.” Journal of Physics: Energy, 5 (3):035004 (2023).
45. Hwan Oh, Jung-Sik Kim, Hannah R. M. Margavio, and Gregory N. Parsons, “Self-Aligned Nanopatterning and Controlled Lateral Growth by Dual-Material Orthogonal Area-Selective Deposition of Poly(3,4-ethylenedioxythiophene) and Tungsten.” Chemistry of Materials, 35 (11):4375-4384 (2023).
44. Adele Moatti, Dylan Silkstone, Taylor Martin, Keith Abbey, Kendall A Hutson, Douglas C Fitzpatrick, Carlton J Zdanski, Alan G Cheng, Frances S Ligler, Alon Greenbaum, “Assessment of drug permeability through an ex vivo porcine round window membrane model.” iScience, 26 (6):106789 (2023).
43. Brendan L. Turner, Jack Twiddy, Michael D. Wilkins, Srivatsan Ramesh, Katie M. Kilgour, Eleo Domingos, Olivia Nasrallah, Stefano Menegatti & Michael A. Daniele, “Biodegradable elastomeric circuit boards from citric acid-based polyesters.” npj Flexible Electronics, 7 (1):25 (2023).
42. Sherafghan Iftikhar, William Martin, Yunfei Gao, Xinbin Yu, Iwei Wang, Zili Wu, Fanxing Li, “LaNixFe1−xO3 as flexible oxygen or carbon carriers for tunable syngas production and CO2 utilization.” Catalysis Today, 416 (113854) (2023).
41. Saqib Gulzar, Cassie Castorena, Shane Underwood, “An investigation into the nonlinear rheological behavior of modified asphalt binders using large amplitude oscillatory shear rheology.” International Journal of Pavement Engineering, 24 (1):2211211 (2023).
40. Vahid Rahmanian, Tahira Pirzada, Eduardo Barbieri, Sherafghan Iftikhar, Fanxing Li, Saad A. Khan, “Mechanically robust, thermally insulating and photo-responsive aerogels designed from sol-gel electrospun PVP-TiO2 nanofibers.” Applied Materials Today, 32 (101784) (2023). 
39. Samuel S. Lee, Lauren Micklow, Andrew Tunell, Kun-Chieh Chien, Saurav Mohanty, Nichole Cates, Stephen Furst, and Chih-Hao Chang, “Engineering Large-Area Antidust Surfaces by Harnessing Interparticle Forces.” ACS Applied Materials & Interfaces, 15 (10):13678–13688 (2023).
38. Runxia Cai, Hilal Bektas, Xijun Wang, Kyle McClintock, Lauren Teague, Kunran Yang, Fanxing Li, “Accelerated Perovskite Oxide Development for Thermochemical Energy Storage by a High-Throughput Combinatorial Approach.” Advanced Energy Materials, 13 (18):2203833.
37. K.S. Salem, H. Jameel, L. Lucia, L. Pal, “Sustainable high-yield lignocellulosic fibers and modification technologies educing softness and strength for tissues and hygiene products for global health.” Materials Today Sustainability, 22 (100342) (2023). 
36. Saqr Alshogeathri, Da Cao, Doup Kim, Ge Yang, “Gel growth and characterization of Cs3Bi2Br9 perovskite single crystals for radiation detection.” Frontiers in Physics, 11 (1129301) (2023). 
35. Jonathan W. Angle, Eric M. Lechner, Charles E. Reece, Fred A. Stevie, Michael J. Kelley, “Analysis of furnace contamination on superconducting radio frequency niobium using secondary-ion mass spectrometry.” Journal of Vacuum Science & Technology B, 41:034005 (2023).
34. Ankit Negi, Alejandro Rodriguez, Xuanyi Zhang, Andrew H. Comstock, Cong Yang, Dali Sun, Xiaoning Jiang, Divine Kumah, Ming Hu, Jun Liu, “Thickness-Dependent Thermal Conductivity and Phonon Mean Free Path Distribution in Single-Crystalline Barium Titanate.” Advanced Science, 2301273 (2023).
33. Shane R. Stein, Dolar Khachariya, Seiji Mita, M. Hayden Breckenridge, James Tweedie, Pramod Reddy, Kacper Sierakowski, Grzegorz Kamler, Michał Boćkowski, Erhard Kohn, Zlatko Sitar, Ramón Collazo, Spyridon Pavlidis, “Schottky contacts on ultra-high-pressure-annealed GaN with high rectification ratio and near-unity ideality factor.” Applied Physics Express, 16 (3):031006 (2023).
32. J. Christudasjustus, C. S. Witharamage, V. B. Vukkum, G. Walunj, T. Borkar, R. K. Gupta, “Surface Film Formation on Al-V Alloys with Far-From-Equilibrium Microstructure.” Journal of The Electrochemical Society, 170 (031508) (2023).
31. Nayna Khosla, Jagdish Narayan, Roger Narayan, Xiao-Guang Sun, and M. Parans Paranthaman, “Nanosecond Laser Annealing of NMC 811 Cathodes for Enhanced Performance.” Journal of The Electrochemical Society, 170 (3):030520 (2023).
30. Samuel R. Bottum, Taylor S. Teitsworth, Qi Han, Andre D. Orr, Jin-Sung Park, Xiaofan Jia, Chiara Cappuccino, Bobby H. Layne, Nilay Hazari, Javier J. Concepcion, Carrie L. Donley, Dmitry E. Polyansky, Matthew R. Lockett, James F. Cahoon, and David C. Grills, “In Situ Attenuated Total Reflectance Infrared Spectroelectrochemistry (ATR-IR-SEC) for the Characterization of Molecular Redox Processes on Surface-Proximal Doped Silicon ATR Crystal Working Electrodes.” The Journal of Physical Chemistry C, 127 (14): 6690–6701 (2023).
29. Abbas Ghaffari, Somayeh Kashani, Kevin Do, Keith Weninger, Robert Riehn, “A nanophotonic interferometer.” Nanotechnology, 34 (18):185201 (2023).
28. Ni Yang, Xuanyi Zhang, Lewis Reynolds, Divine Kumah, Chengying Xu, “The Role of Carbon Content: A Comparison of the Nickel Particle Size and Magnetic Property of Nickel/Polysiloxane-Derived Silicon Oxycarbide.” Advanced Materials Engineering, 25 (9):2201453 (2023).
27. Iee Lee Hia, Alexander D. Snyder, Jack S. Turicek, Fernanda Blanc, Jason F. Patrick, Daniel Therriault, “Electrically conductive and 3D-printable copolymer/MWCNT nanocomposites for strain sensing.” Composites Science and Technology, 232 (109850) (2023).
26. Jian Dou, Joey Funderburg, Kunran Yang, Junchen Liu, Dennis Chacko, Kui Zhang, Adam P. Harvey, Vasudev P. Haribal, S. James. Zhou, Fanxing Li, “CexZr1–xO2-Supported CrOx Catalysts for CO2-Assisted Oxidative Dehydrogenation of Propane─Probing the Active Sites and Strategies for Enhanced Stability.” ACS Catalysis, 13 (1):213–223 (2023).
25. Yosra Kotb, Christopher M. Serfass, Alain Cagnard, Katelyn R. Houston, Saad A. Khan, Lilian C. Hsiao, Orlin D. Velev, “Molecular structure effects on the mechanisms of corrosion protection of model epoxy coatings on metals.”Materials Chemistry Frontiers, 7 (2):274-286 (2023).
24. Veenasri Vallem, Vidushi Aggarwal, Michael D. Dickey, “Stretchable Liquid Metal Films with High Surface Area and Strain Invariant Resistance.” Advanced Materials Technologies, 8 (5):2201233 (2023).
23. M. Cabral, A.P. Brown, J. Bultitude, A. Britton, R. Brydson, T. Roncal-Herrero, D.A. Hall, S.J. Milne, A.M. Rappe, D.C. Sinclair, J. Zhang, Y. Li,
“Structural investigation of the temperature-stable relaxor dielectric Ba0.8Ca0.2TiO3-Bi(Mg0.5Ti0.5)O3.” Journal of the European Ceramic Society,
43 (2):362-369 (2023). 
22. Aidan J. Canning, Xinrong Chen, Joy Q. Li, William R. Jeck, Hsin-Neng Wang, Tuan Vo-Dinh, “miRNA probe integrated biosensor platform using bimetallic nanostars for amplification-free multiplexed detection of circulating colorectal cancer biomarkers in clinical samples.” Biosensors and Bioelectronics, 220 (114855) (2023). 
21. Sophie Van Schoubroeck, Lisandra Chacon, Autumn M. Reynolds, Nathalie Lavoine, Marko Hakovirta, Ronalds Gonzalez, Steven Van Passel, Richard A. Venditti, “Environmental sustainability perception toward obvious recovered waste content in paper-based packaging: An online and in-person survey best-worst scaling experiment.” Resources, Conservation and Recycling,188 (106682) (2023).
20. Ho Lun Chan, Rasheed Auguste, Elena Romanovskaia, Angelica Lopez Morales, Franziska Schmidt, Valentin Romanovski, Christopher Winkler, Jie Qiu, Yongqiang Wang, Djamel Kaoumi, Farida A. Selim, Blas P. Uberuaga, Peter Hosemann, John R. Scully, “Multi–length scale characterization of point defects in thermally oxidized, proton irradiated iron oxides. Materialia, 28 (101762) (2023).
19. Qingyang Wang, Nathalie Lavoine, Deepti Salv, “Cold atmospheric pressure plasma for the sanitation of conveyor belt materials: Decontamination efficacy against adherent bacteria and biofilms of Escherichia coli and effect on surface properties”. Innovative Food Science & Emerging Technologies, 84 (103260) (2023).
18. J. Christudasjustus, V.B. Vukkum, R.K. Gupta, “Evolution of surface film in AA2024-T3 after a long-term immersion in NaCl solution.” Corrosion Science, 215:111056 (2023).
17. Rachel S. Bang, Sangchul Roh, Austin H. Williams, Simeon D. Stoyanov, Orlin D. Velev, “Fluid Flow Templating of Polymeric Soft Matter with Diverse Morphologies.” Advanced Materials, 35 (16):2211438 (2023).
16. Chenyu Jiang, Sarah Dejarnette, Wangbingfei Chen, Frank Scholle, Qingqing Wang & Reza A. Ghiladi, “Color-variable dual-dyed photodynamic antimicrobial polyethylene terephthalate (PET)/cotton blended fabrics.” Photochemical & Photobiological Sciences (2023).
15. Masoud Ghasemi, Boyu Guo, Kasra Darabi, Tonghui Wang, Kai Wang, Chiung-Wei Huang, Benjamin M. Lefler, Laine Taussig, Mihirsinh Chauhan, Garrett Baucom, Taesoo Kim, Enrique D. Gomez, Joanna M. Atkin, Shashank Priya & Aram Amassian, “A multiscale ion diffusion framework sheds light on the diffusion–stability–hysteresis nexus in metal halide perovskites.” Nature Materials, 22 (3):329–337 (2023).
14. Tunyaboon Laemthong, Ryan G. Bing, James R. Crosby, Mohamad J. H. Manesh, Michael W. W. Adams & Robert M. Kelly, “Role of cell-substrate association during plant biomass solubilization by the extreme thermophile Caldicellulosiruptor bescii.” Extremophiles, 27 (1):6 (2023).
13. Madelyn Van Blunk, Vishal Srikanth, Sharda S. Pandit, Andrey Kuznetsov, Yevgeny Brudno, “Absorption rate governs cell transduction in dry macroporous scaffolds.” Biomaterials Science, 11 (7):2372-2382 (2023).
12. Shaun O’Donnell, Reinhard K. Kremer, and Paul A. Maggard, “Metastability and Photoelectrochemical Properties of Cu2SnO3 and Cu2–xLixTiO3: Two Cu(I)-Based Oxides with Delafossite Structures.” Chemistry of Materials, 35 (3):1404–1416 (2023).
11. Katherine A. Wilson, Lacey A. Picinich, Ali R. Siamaki, “Nickel–palladium bimetallic nanoparticles supported on multi-walled carbon nanotubes; versatile catalyst for Sonogashira cross-coupling reactions.” RSC Advances, 13 (12):7818-7827 (2023).
10. Mingyi Zhang, Eric M. Lopato, Nnamdi N. Ene, Stephen D. Funni, Tianxiang Du, Kunyao Jiang, Stefan Bernhard, Paul A. Salvador, Gregory S. Rohrer, “Synthesis and Structure of an Ion-Exchanged SrTiO3 Photocatalyst with Improved Reactivity for Hydrogen Evolution.” Advanced Materials Interfaces, 10 (10):2202476 (2023).
9. Nayna Khosla, Jagdish Narayan, Roger Narayan, Xiao-Guang Sun, Mariappan Parans Paranthaman, “Microstructure and defect engineering of graphite anodes by pulsed laser annealing for enhanced performance of lithium-ion batteries.” Carbon, 205:214-225 (2023).
8. Denysse Gonzalez Ovalle, Christopher Rock, Christopher Winkler, Devin Hartshorn, Chris Barr, Tristan Cullom, Prithwish Tarafder, Tim Prost, Emma White, Iver Anderson, Tim Horn, “Microstructure development and properties of micro-alloyed copper, Cu-0.3Zr-0.15Ag, produced by electron beam additive manufacturing.” Materials Characterization, 197 (112675) (2023).
7. Zachary J. Farrell, Alan R. Jacob, Vi Khanh Truong, Aaron Elbourne, Wilson Kong, Lilian Hsiao, Michael D. Dickey, Christopher Tabor, “Compositional Design of Surface Oxides in Gallium–Indium Alloys.” Chemistry of Materials, 35 (3):964–975 (2023).
6. Md. Milon Hossain, Mostakima M. Lubna, Philip D. Bradford, “Multifunctional and Washable Carbon Nanotube-Wrapped Textile Yarns for Wearable E-Textiles.” ACS Applied Materials & Interfaces, 15 (2):3365–3376 (2023).
5. H Alex Hsain, Younghwan Lee, Suzanne Lancaster, Patrick D Lomenzo, Bohan Xu, Thomas Mikolajick, Uwe, Schroeder, Gregory N Parsons, Jacob L Jones, “Reduced fatigue and leakage of ferroelectric TiN/Hf0.5Zr0.5O2/TiN capacitors by thin alumina interlayers at the top or bottom interface.” Nanotechnology, 34 (12):125703 (2023).
4. K. Jagannadham, C. B. Parker, J. T. Glass, “The influence of light incidence on the bipolar switching in the two-terminal devices with n-ZnO and p-SrCu2O2 films.” Applied Physics A, 129 (32) (2023).
3. J. Christudasjustus, M. R. Felde, C. S. Witharamage, J. Esquivel, A. A. Darwish, C. Winkler, R. K. Gupta, “Age-hardening behavior, corrosion mechanisms, and passive film structure of nanocrystalline Al-V supersaturated solid solution.” Journal of Materials Science & Technology, 135:1-12 (2023).
2. Julio E. Terán, Lokendra, Pal, Richard J. Spontak, Lucian, Lucia, “Surface Mechanical Properties and Topological Characteristics of Thermoplastic Copolyesters after Precisely Controlled Abrasion.” ACS Applied Materials & Interfaces,15 (5):7552–7561 (2023).
1. Christopher T. Johns, Karen Grace Bondoc-Naumovitz, Alexandra, Matthews, Paul G,Matson, M. Debora Iglesias-Rodriguez, Alison R. Taylor, Heidi L. Fuchs, Kay D. Bidle, “Adsorptive exchange of coccolith biominerals facilitates viral infection.” Science Advances, 9 (3) (2023).