Bruker Hysitron TI980 Triboindenter
AIF’s Bruker Hysitron TI980 Triboindenter is a quasistatic indentation system for nanomechanical testing of mechanical properties, including Young’s modulus, hardness, and fracture toughness. It is ideal for measuring mechanical properties of coatings and thin films, as well as the spatial dependence of hardness and elastic modulus. Its three-plate capacitive transducer design allows for a high displacement sensitivity and a low thermal drift. It is also capable of tribological testing including nanoscratch testing and wear testing.
In situ scanning probe microscopy (SPM) capabilities are also available to image sample surfaces before and after indentation, scratch, or wear testing. The piezoelectric scanner used for SPM imaging can also be used for automated mechanical testing at multiple locations within an imaged area. Creep, stress relaxation, and surface adhesion can also be studied using closed-loop load- or displacement-controlled indentation modes.
Analysis software accompanies the system to calculate reduced moduli and hardnesses from unloading curves and measured tip area functions.
Users may select from a variety of indentation tips from AIF’s stock (including Berckovich, NorthStar cube corner, cono-spherical, and fluid cell tips) or supply their own tips for testing. An overview of available tips and a tip selection guide are available on Hysitron website at
Questions? Contact Toby Tung at toby_tung@ncsu.edu.
Location: MRC room 304
Equipment Specifications
| Indentation Axis | Lateral Axis | |
| Maximum Force | 10 mN | 2 mN |
| Maximum Indentation Displacement | 5 µm | 500 nm |
| Maximum Lateral Displacement | N/A | 15 µm |
| Thermal Drift | <0.05 nm/sec | <0.05 nm/sec |
| Load Noise Floor | 20 nN | 3.5 µN |
| Load Resolution | 1 nN | 50 nN |
| Displacement Resolution | 0.006 nm | 0.02 nm |
| Displacement Noise Floor | 0.1 nm | 2 nm |
| Maximum Range of Piezoelectric Scanner | 60 µm x 60 µm | 60 µm x 60 µm |